- How to install Windows 10 into a 2011 iMac without using the Boot Camp Assistant, an optical (DVD) drive or third party tools? Ask Question. Supplied by Apple for my Mac, was designed only for the legacy BIOS boot method of installation. How to install Windows 10 into a 2013 iMac without using the Boot Camp Assistant, USB flash drive.
- Mar 24, 2020 Use your Apple Keyboard in Windows with Boot Camp. You can use an Apple keyboard or a keyboard designed for Microsoft Windows with your Mac. Some keys on your keyboard might work differently between macOS and Windows.
- Oct 04, 2016 The BIOS can be entered at start-up to allow the user to manipulate setting using a graphical interface. On a Mac with OS X, most of the hardware settings must be altered within the operating system, though there is an Open Firmware which is similar to BIOS that can be accessed at boot.
Boot Camp has to emulate a BIOS system, as Windows requires this to run. Apple uses something called the bless tool in order to instruct EFI (which Macs are based on) to activate this BIOS system. However, if I recall correctly, emulation of BIOS is not supported on Mac for any device that is not attached via a SATA connection (ie. Jan 22, 2012 Is it possible to access the BIOS menu on the Windows 7 partition of a Mac? Obviously, we don't have a 'true' Delete key, and I've tried F2 (or increase brightness, as it.
When you set up Boot Camp, you'll be stepping through a wizard known as the Boot Camp Assistant. After set up is complete, you can use the Boot Camp Assistant again to remove or reinstall Windows. To open the Boot Camp Assistant, click on your Finder, select Applications from the left, scroll down and select Utilities, and then double-click Boot Camp Assistant.
Before you continue, make sure you have the following. We'll take a closer look at each of these before going on, including what to do if you don't have one:
Advertisement
- The install disc or ISO for a supported version of Windows
- A copy of the Boot Camp Install and Setup Guide
- A blank CD, DVD, or MS-DOS-formatted storage device such as a USB drive or SD card
If you don't have a Windows install disc, you can download an ISO of Windows and burn that to a disc. You'll need to use this disc in the Mac's CD/DVD drive during your Boot Camp setup. Be sure to use this information when you're selecting which version of Windows to use:
- Boot Camp for Mac OS X Lion (10.7) supports Windows 7 Home Premium, Professional and Ultimate editions, 32-bit or 64-bit.
- Boot Camp for Mac OS X Snow Leopard (10.6) supports Windows XP Home or Professional with Service Pack 2, Windows Vista Home Basic, Home Premium, Business or Ultimate, and Windows 7 Home Premium, Professional or Ultimate. Support for 64-bit versions is limited: no 64-bit versions of Windows XP, and 64-bit versions of Vista and 7 only on MacBook Pro models from 2008 or later and iMac and MacBook models from late 2009 and later.
The Boot Camp Installation and Setup Guide is available from the 'Introduction' page of the Boot Camp Assistant. There, click 'Print Installation & Setup Guide.' If you don't want to print it, you can save it as a file by clicking 'OK' on the first print dialog, then 'Save as PDF' from the PDF menu of the second print dialog.
When you click 'Continue' on the 'Introduction' screen, you'll have three options available. Assuming you've already obtained the Windows install disc, you can keep the first option unchecked and the last option checked. The middle option is to download the latest Windows support software. This includes all the drivers necessary for Windows to work on your Mac hardware. Keep this option checked, and follow the instructions in the screens that follow to download those and save them to an external storage device (like a USB drive) or blank disc. At the time of this writing, the total download size for the WindowsSupport download saved to an external drive was just under 675 MB.
Now let's take a closer look at the next step in Boot Camp Assistant: partitioning.
Need to run applications using Windows and a powerful eGPU? Here's one way to do it!
Apple enabled eGPU functionality seemingly eons ago to make macOS a fully functional development platform for AR and VR. Sometimes, however, users might need to boot in Windows to test, compare, and simply run certain applications. Apple's hardware can make things problematic with this in mind. Adding hardware peripherals on a Windows-based PC is pretty straightforward. Adding hardware peripherals to a Mac running Windows is another matter. Now that eGPUs have been available for quite some time on macOS, things have improved. And since Microsoft has released an eGPU friendlier update to Windows 10 (update 1803), you can now take some 'easier' steps to get your eGPU to function on your Mac whilst running BootCamp.
Install Windows with BootCamp
First, you need to install Windows via BootCamp. For detailed information on how to do that follow our how-to guide. Make certain you perform this step without the eGPU attached.
Prepare your Mac for special boot options
For our next steps, we will assume you are familiar with Disk Utility. If you need more information, please take the time to understand the basics of the application before using it. It can seriously bork your system to an unrecoverable state. You've been warned! Once you have Windows installed at the most basic level (no need to worry about updates yet), reboot into macOS. You can do this by:
- Hold down the option key on your keyboard while powering on the machine.
- You'll see some boot options that you can select. Select the Macintosh HD.
- Hit return.
Once in macOS:
- Start Disk Utility.
- Create a new APFS Partition. It needn't be large but I made mine around 6GB so I can easily store boot files on it but a small 80MB size would do just fine.
- Name the partition EFI.
In order for us to be able to use the eGPU, we'll need to trick the hardware into thinking we are starting up in macOS when in reality we'll be starting it up into Windows. A utility will be needed during boot time to allow for the Intel GPU to be enabled. Although my MacBook Pro also has a secondary more powerful dGPU onboard, for some reason, the Radeon 560 GPU when paired with the eGPU causes system locks and blue screens. This will be our workaround.
- Navigate to https://github.com/0xbb/apple_set_os.efi/releases.
- Download the latest version of apple_set_os.efi.
Now we must set up the file structure to be able to be properly read by Mac's boot manager.
The following year saw Songz's highest charting song to date, 'Bottoms Up' featuring rapper Nicki Minaj from his fourth studio album, Passion, Pain & Pleasure. Death to autotune. Kelly in June 2009. The 'Demo' Tape is the first mixtape released by R. The mixtape originally was to keep fans over until Kelly's forthcoming album was released. Ready was nominated for Best Male R&B Vocal Performance at the 2008 Grammy Awards.
- Open terminal.
- Type cd /Volumes/EFI. This is the partition we set up earlier.
- Type mkdir efi.
- Hit enter.
- Type mkdir efi/boot.
- Hit enter.
Next, we must copy the apple_set_os.efi file we download to the newly created directory structure we just created. I'm assuming you still have the same terminal application open as stated in the previous steps. Otherwise, ensure you're in the /Volumes/EFI directory.
- Type cp ~/Downloads/apple_set_os.efi efi/boot/bootx64.efi
- Hit enter.
Restart into Windows using the new EFI boot option
Similar to the way we booted into macOS, we'll now need to boot into Windows using our utility.
- Power off your Mac.
- Power on your Mac whilst holding the option key.
- Select EFI boot.
- Hit enter.
Boot Camp How To Switch Back To Mac
You'll now start back up into Windows with all of your connected GPUs visible to the OS. However, the non-Intel dGPU in your MacBook Pro will cause a conflict with your eGPU once you've installed the proper AMD Radeon drivers. So instead of using the AMD provided drivers for the internal dGPU, make certain you leave the driver installed as a Basic Display Adapter.
Allow the OS to automatically download and install the proper drivers for your eGPU adapter. Once the certified versions of eGPU display adapter drivers have installed, you can then download and update drivers using the device manager. Using the manufacturer's display driver adapter installer causes my internal dGPU to be discovered prompting a driver upgrade and then a system freeze.
On top of that, updating my display driver with the Apple-provided BootCamp updater also causes a system hang. Avoid that as well for the time being. If you find yourself having made a driver installation mistake, restart in safe mode, delete the installed display adapters in device manager and start again.
Final comments
That's how I got my eGPU to run under BootCamp on my macOS on my 2016 MacBook Pro. If you've found better less intrusive methods, let us know in the comments!
macOS Catalina
Main
We may earn a commission for purchases using our links. Learn more.
🍎 ❤️Bios On Mac Boot Camp Windows 10
This is how Apple will keep people safe when reopening Apple Stores
How To Boot Into Mac Os Bootcamp
Apple recently reopened its store in Seoul, South Korea. And it has measures in place to keep people safe.